S is for "Super"
This brand new amplifier may look like the standard DIA-250 amplifier we introduced three years ago, but in fact we put more than a years work into improve every part of the DIA-250s already fantastic award winning performance. We changed and improved the electrical circuits and layouts in more than twenty ways, the most significant being:
- Optimized mains filter
- Improved general and local power supplies
- New input stage
- Improved output stage
- New analogue stages in the D/A converter
- Improved digital signal routing
- Updated firmware
- Improved connectors
- Incorporated aptX Bluetooth module
More details, better micro dynamics and more "air" around the performing musicians. Everything is served with naturalness and a musicality normally reserved big expensive class A/B amplifiers - the result is stunning!
Class-D with smooth analogue music
The DIA-250s amplifier offers a state of the art Class-D output stage with dedicated and optimized switch mode power supplies. The multiple stage power amplifier is built around proven technology from International Rectifier, optimized with a precision high frequency oscillator and PWM modulator. A pair of precision switching MOS-FET transistors, with super low on-resistance ensures the high frequency switching is done perfectly and with as little loss as possible. The output filters are made from quality PP capacitors and low DCR coils, converting the high power PWM signals back into detailed and smooth analogue music.
More than just an Amp
The built-in D/A converter offers real high end performance, enabled by the use of a dedicated power supply, a balanced-drive Burr-Brown PCM1794 D/A converter, an optimized high bandwidth I/V converter, and an analogue stage with low-Q, low pass filters. All digital inputs are upsampled to 24bit/192kHz. This D/A converter will upgrade any digital source - such as wired or wireless streaming from your computer or CD drive - to a high end level of detail and musical performance.
Versatility and Connectivity
We had our eye on versatility and connectivity when designing this amplifier. The DIA-250s offers not only a wide range of digital and analogue inputs, but also line outputs, a trigger signal for external power amplifiers, and a configurable home theater input. The HT input can turn the amplifier into a fixed level power amplifier for use in a surround setup, without compromising the sonic performance.
- 2x 250W@8ohm / 2x 500W@4ohm
- Class D output stage
- Built in 24bit/192kHz D/A converter with upsampling
- Coax, optical and asynchronous USB digital input up to 24bit/192kHz, optical up to 24bit/96kHz
- aptX Bluetooth 4.0 receiver
- Accepts digital streaming directly from Apple iPad
- Two unbalanced and one balanced inputs
- Nonmagnetic enclosure
- Direct function; enables use in home theater sytems
- Designed, developed and build in Copenhagen, Denmark
Gato Audio DIA-250S Integrated Amplifier
Output power 2x 250 W / 8 Ω - 2x 500 W / 4 Ω Frequency response 20 Hz-20 kHz - 0.5 dB, and 2 Hz-70 kHz - 3 dB Total Harmonic Distortion < 0,01% at rated power Signal to noise ratio > 110 dB Line out maximum level 13V balanced, 6,5V unbalanced Total Harmonic Distortion < 0,001% pre out Input impedance 20 kΩ RCA or 40 kΩ Balanced Line output impedance 75 Ω Voltage gain 26 dB (+10 db headroom) Recommended speaker load 4 -16 Ω
Balanced analogue inputs 1 pair gold plated XLR Neutrik Unbalanced analogue inputs 2 pairs of gold plated RCA Stereo Digital inputs 1 pc USB type B, 1 pc Toslink, 1 pc RCA, 1 pc aptX Bluetooth Balanced analogue outputs 1 pair gold plated XLR Neutrik Unbalanced analogue outputs 1 pair of gold plated RCA Stereo Speaker output 2 pairs of gold plated safety banana Trigger, 12 V 1 pc mini jack
Size & Power
Power Requirements 115 VAC/230 VAC, 50 Hz/60 Hz, 1000W max Power consumption stdb/idle/max < 1W/23W/1000W Dimensions (WxHxD) 325 x 105 x 420 mm / 12.8 x 4.1 x 16.5" Weight 10 kg / 22 lb