Origin Live ENCOUNTER Mk4 Tonearm
The Encounter arm introduces dual-pivot bearings to the Origin Live tonearm range. Dual Pivot bearings decouple the arm from its environment in a far more competent way than conventional bearings. The result is similar to Uni-pivot arms in terms of a natural fluid-like quality to the sound. However, this comes without the drawbacks of Uni-pivot arms – namely the fiddly setup, wobbly cueing and decrease in bass performance.
Dual Pivot bearings have the advantage of very low friction which helps give the encounter greater transparency and musicality than the Zephyr arm, allowing you to hear previously unnoticed details in your music. It’s also fast and enables musical rhythms to keep in time with one another. As with all our arms, tonal balance is neutral allowing it to work well in all types of systems.
FEATURES >>>>>>>>>>>>
Arm Tube
is a high-grade aircraft alloy t0 reduce the effect of resonance. This has the enormous benefit of allowing your cartridge to function correctly without unwanted movements caused by resonance.
High Strength Rear-stub
improves counterweight stability in vibration – thus enabling the arm tube to hold the cartridge more steadily.
Headshell
features improved de-coupling and lightweight finger-lift.
Dual Pivot Bearings
For vertical arm movement, the bearings consist of Ultra-hard tungsten carbide points sitting in hardened and burnished steel cups. This combination not only delivers incredibly low friction levels but is also much more robust than jewelled bearings which tend to shatter under stress. The results are incredible transparency, fluidity and retrieval of fine detail.
Precise & Accessible VTA Adjuster
VTA can be adjusted precisely and infinitely using a large diameter calibrated dial. A further advantage is that all adjustments can be carried out above the arm-board (unlike lower arms in the range which demand access below the arm-board).
Azimuth Adjuster
Falling Weight Side Bias
Tests show this to be the highest performing method of achieving side bias. It has lower friction, better constant force and lower resonance than other alternatives such as magnets, springs, levers and twisted threads.
Internal Wiring
is high-grade copper Litz wire, cryogenically frozen to reduce discontinuities in the conductors. This wire allows great transparency, detail and freedom from artefacts.
1m Upgrade External Cable
(6mm diameter) Low resistance cable with high conductivity Gold Plated RCA plugs to fit directly into your phono-stage or amplifier.
MORE INFO AT ORIGIN LIVE WEBSITE HERE
“A new benchmark for musical communication, natural detail and timbral truth. All at a price that, considering the quality of its performance, can only be called a bargain.”
Stereo Times
“It says volumes for the excellence of this arm that it could put two such different pickups through their paces so even-handedly.”
The Absolute Sound, Editors Choice Award 2012
“In the Origin Live rig, it was warm, boisterous, fast, big and ballsy with tone that could only be described as lush and gorgeously vibrant. It was shockingly good on anything with brass with gobs of realistic bite to trumpets, trombones and the like”
Tone Audio
“If ever there was a case of swings and roundabouts within hardware comparison then the tonal differences between the 9.5” and 12” versions of the Encounter 3c was it. The 9.5” walked a lighter step. It produced finesse and style with fine detailing highlighting a star clarity.”
Paul Rigby
“Sounds like nothing that I have heard or owned before. The tonal quality is accurate and clear, bass notes have no overhang. The arm is astonishingly transparent and neutral.”
Derek Abrahams
__________________________________
Origin Live arms can fit most decks thanks to 4 length options and mounting adaptors.
For Rega arm mounts (221mm effective length arms)
– Origin Live arms have a threaded base mounting that fits all arm-boards designed for Rega arms. This is literally a fuss-free drop-in replacement with no modifications needed, regardless of whether the Rega arm has a threaded base or 3 point mounting.
For Linn style arm mounts (211mm effective length arms)
– We offer predrilled arm-boards for fitting our standard arms (221mm effective length) to the Linn LP12. Alternatively, we offer our arms with Linn geometry (211mm effective length) and Linn style 3 bolt base mount. This allows our arms to work as a simple drop-in replacement for all Linn arms and those which follow this geometry.
For SME arm mounts
– you can fit our bolt-on SME adaptor which means the arm can be fitted to any SME arm-board.
top of page
Want for more info?
Contact our
expert sales team NOW!
email us via this link
or CALL US ON:
0800 464 7274
NOW !
£1,550.00Price
bottom of page