Audiant SR35 is a 2-way floorstanding vented loudspeaker, capable of delivering low bass and effortless dynamics from a compact, small footprint cabinet. Equipped with two 130mm woofers and a 22mm Sonomex dome tweeter from Norwegian company SEAS, one of the World's most prestigious producers of drivers, the MTM (mid-tweeter-mid) driver configuration allows for a vivid and engaging sound, delivered with accuracy and precision.
Its aluminium baffle, CNC machined from solid aluminium, characterizes the Audiant SR35, providing mechanical stability of the drivers and the control of unwanted resonances. Complex internal bracing and extensive acoustic damping further minimise cabinet resonances, standing waves and stray reflections – ensuring the speaker is free from cabinet colouration and retains the purity of your music.
The rear-facing reflex port design maximises bass efficiency while minimising port noise and low frequency compression, providing bass that is clean, accurate and articulate. Even though rear facing, the ports low-noise design allows the speaker to be placed close to the wall and along with the speakers small footprint gives you the freedom to place the speakers in your room where you like without restriction.
The aluminium baffle of the Audiant SR35, along with the machined aluminium feet, gives the speaker a modern and contemporary look. With the choice of three real wood veneers and two painted colours to complement the aluminium trims, the SR35 will suit your style and easily integrate into your living room.
High definition tweeter
The lightweight Sonomex fabric dome allows a smooth and extended frequency response, while the wide surround combines the low frequency response of a 1" dome with the high frequency dispersion of a ¾" dome.
Low distortion woofers
The mid/bass woofers have a lightweight copper clad aluminium wire (CCAW) voice coil that allows low distortion and excellent transient response, while the coated paper cone gives an extended frequency response with a controlled roll off.
The MTM driver configuration, pioneered by D'Appolito to correct lobe tilting inherent in conventional mid-tweeter configurations, controls vertical sound dispersion – greatly reducing ceiling and floor reflections, providing a sound that is accurate and engaging.
Solid aluminium baffle
The 12mm thick machined aluminium baffle provides excellent mechanical stability that ensures accurate driver placement and controls unwanted resonances. The result is a sound that is extremely dynamic with crystalline clarity and detail.
The linearity and low distortion of the low-loss air core inductors, along with the low inductance and linear impedance characteristics of the audiophile-grade polypropylene capacitors, allows a clean signal path with very low losses – providing a vivid sound with a high level of detail and purity.
Each cabinet is meticulously crafted and lovingly finished by hand to create truly beautiful speakers. Your choice of three luxurious real wood veneers and two painted colours ensures the speakers will complement your living room.
Perreaux Audiant SR35 Loudspeakers
Speaker System: 2-way floorstanding MTM vented loudspeaker Tweeter: 22mm (¾") high definition Sonomex dome Woofers: 2 x 130mm (5") long-throw coated paper cone Frequency Range: 33Hz–30kHz, at -6.0dB Frequency Response: 45Hz–20kHz, at ±2.5dB Crossover Frequency: 2650Hz Impedance: 4Ω nominal, according to IEC 268-5
Sensitivity: 93dB SPL, at 2.83V/1m
90dB SPL, at 1W/1m
Power Handling: 120W long term, according to IEC 268-5
250W short term, according to IEC 268-5
Suggested Amplifier Power: 25W–150W, without clipping Cabinet Dimensions: Width: 160mm (6.3")
Depth: 315mm (12.4")
Height: 1040mm (40.9")
Overall Dimensions: Width: 230mm (9.1"), including feet
Depth: 340mm (13.4"), including terminals
Height: 1065mm (41.9"), including feet and spikes
Weight: 22.0kg (48.4lb) Available Finishes: Walnut, real wood veneer
Rimu, real wood veneer
Mahogany, real wood veneer
Satin white, painted finish
Satin black, painted finish