Introducing 212/SE, their most powerful and agile subwoofer, designed exclusively for larger system and rooms to allow superior state of the art speakers to spring to full voice. They believe in quality first, not simply power and boom.

 

QUALITY MEETS QUANTITY

They believe in quality first, not simply power and boom. They believe that 1,000 watts is only desirable if it’s conveyed with speed and control. Which is why the 212/SE was engineered to not only make your heart pound and walls shake, but restore midrange warmth and harmonic structure, while providing a powerful, rich low-end. This combination of speed, power and grace driving multiple room modes (forward, down and rear) makes it ideally suited for high end 2-channel, grand rooms and dedicated theaters, allowing larger state of the art speakers to spring to full voice.

 

TWIN CONTINUOUS CAST™ ALLOY BASS ENGINES

To produce their highest output single-box solution, they doubled up on the Continuous CastTM Alloy Bass Engines that bring critical acclaim to Serie S, altering them slightly for this twin front-firing configuration. These twin actives are responsible for 212/SE’s incredible speed and tactility. Their Continuous CastTM Alloy Cones reduce moving mass while maintaining rigidity, producing far more speed and precision than prior designs. These twin long-stroke 12″ bass engines, partnered with (2) matching 12″ passives provide the speed quality of a REL with a power never felt before. This combination offers the driven surface area of twin 17” drivers in a cabinet just 16” wide.

 

DUAL CONTINUOUS CAST ALLOY PASSIVE RADIATOR

The 212/SE uses two matching Continuous Cast Alloy passives that are stiff, lightweight and incredibly well behaved. Their approach to passive design results in performance more akin to a variable ratio driver size – as more power and deeper bass is demanded, the passive comes to life, gradually expanding the capabilities of the active engines. The down firing passive produces deep, floor-crawling bass that makes a room shudder. Mounted above the amplifier panel on the rear is the second passive. This unit produces wrap around “atmospheric” bass that adds air and shimmer to the sound. Coupling with either the rear wall or the rear corner of a room allows for bass to develop exceedingly long wavefronts and adds an ease and effortless quality unique to single-box designs.

 

NEXTGEN3 1,000W DIGITAL AMPLIFIER

Beyond their proprietary drivers, the performance of a REL is determined by our unique input filters and amplifiers. 212/SE harnesses a simple filter-type that is very fast—about 8 milliseconds in group delay– to cross out unwanted higher frequencies to our driver. This speed and gentle crossover slopes allow for seamless blending of RELs with the main speakers. RELs do not include a high pass filter to cross out bass from the main speaker because to do so would generally produce more unwanted effects than the minor benefits such a design confers. 212/SE’s power amplifier is a powerful NextGen3 1,000W (1,700 peak) digital amplifier. Their Herculean design allows each driver to output over 110 dB with ease–power enough to drive very large rooms to very high output.

 

LONGBOW ZERO-COMPRESSION WIRELESS

LongBow permits very fast, uncompressed bass to be sent wirelessly within the same room approximately 45 feet (somewhat dependent upon room clutter). They have selected an uncompressed format as it results in natural, quick delivery compared with conventional wi-fi or Bluetooth systems. LongBow also offers both high level (or low level with crossover intact) AND .1 channel delivery so that REL Theatre Reference performance can be maintained even when using their wireless delivery system.

REL 212/SE

£3,500.00Price
Include Longbow Transmitter?
  • TYPE: (2) Front-firing active drivers, (1) rear passive, (1) down-firing passive

    ACTIVE DRIVER SIZE & MATERIAL: (2) 12 in., 300mm long-throw, Continuous CastAlloy™ cone structure, cast chassis

    PASSIVE RADIATOR SIZE & MATERIAL: (2) 12 in., 300mm Continuous CastAlloy™ cone structure, cast chassis

    LOW FREQUENCY EXTENTION: -6dB at 19 Hz

    INPUT CONNECTORS: High Level Neutrik Speakon, Low Level stero RCA, LFE RCA, SMA for wireless antenna

    OUTPUT CONNECTORS: N/A

    POWER OUTPUT: 1,000 watts (RMS)

    AMPLIFIER TYPE: NextGen3 Class D

    WIRELESS CAPABILITY: Longbow (Optional), Zero Compression, Individual discrete D/A and A/D Encoders

     

    Protection System

    FULLY ELECTRONIC SET SAFE: Yes

    D.C. FAULT: Yes

    OUTPUT SHORT: Yes

    MAINS INPUT VOLTAGE: 220-240 volts, 1120-120 volts for certain markets

    FUSES: 7 Amp semi delay 220 volts operation, 15 Amp semi delay 120 volts operation

     

    Dimensions

    W X H X D: 17.5 x 32 x 20 in. (444.5 x 815.5 x 507 mm)

    NET WEIGHT: 122 lbs. (55.3 kg)

    FINISH: Piano Black Lacquer, 8 coats

     

    Supplied Accessories

    MAINS LEAD: Yes

    NEUTRIK SPEAKON: Yes (10 Meters Nominal):

    INTERCONNECT: -

    USERS MANUAL: Yes

©2018

website design by