The L2i-SE is our response to “what if?” What if we could combine our L2 Signature Preamplifier and L2 Signature Monoblocks into one chassis but with absolutely minimal concessions to design and performance? Could we still offer all the flexibility, build quality and stunning appearance to truly stand in a class of its own? The L2i-SE is Vinnie Rossi’s realization of that dream.

 

Unlike the L2 Integrated Amplifier (L2i), which runs a simpler 6SN7 linestage, the L2i-SE inherits from our L2 Signature Preamplifier the direct-heated big power triodes. Only one pair of the finest sounding 4-pin, directly heated triodes (DHT) are run in a dual-mono, class-A, grounded-grid topology with zero feedback. They feed a true dual-mono, high-bandwidth class-AB MOSFET output stage making the L2i-SE a DHT hybrid integrated amplifier and likely the only one of its kind in the world!

 

There are absolutely no compromises on speed and tonality, nor any distracting effects of driver tubes, coupling caps or output transformers. Music is reproduced with intense spaciousness, harmonic sophistication, liquidity and detail well beyond small triodes and pure transistors alike.

 

You get the same flexibility as the L2 Signature Preamplifier (flick-of-a-switch tube rolling, tube bypass mode, L2 Dac and Phonostage options) and the full-function L2 remote handset. Merging all of this with superlative build quality, reliability and a 10-year warranty make the L2i-SE a striking single-chassis proposition that sits just one step below our flagship separates!

 

L2i-SE  Features (Linestage)

  • Vinnie Rossi’s latest Class-A, ultra wide bandwidth directly heated triode (DHT) preamplifier design, compatible with: 2A3, 45, 300B, PX4, 101D, 205D, and SV811 DHT families with one-switch filament voltage selection
  • Dual-mono layout using multiple patented Belleson super regulators for ultra-quiet linear voltage regulation of the triodes, and the (optional) L2 DAC and L2 Phonostage modules
  • Discrete, 64-step resistor ladder volume control using Pickering England silent signal relays
  • True active balanced (XLR) and single-ended (RCA) line level inputs and preamplifier outputs
  • Internal “DHT bypass mode” switches (replaces DHT stage with a Class-A JFET stage)
  • Yamamoto solid Teflon UX-4 tube sockets
  • Mesh tube covers for added noise shielding and tube protection
  • Included tubes: EH300B Gold-Grid (matched pair)
  • Full-function aluminum remote control handset

 

L2i-SE Features (Power output stage) 

  • Wide-bandwidth, purist Class AB MOSFET topology (only one pair of output devices)
  • True dual-mono power supply with custom-wound toroidal power supply transformers
  • WBT NextGen 0703cu Speaker Binding Posts
  • Speaker outputs can be switched on/off via the front panel

 

Additional Features

  • Solid, precision CNC machined aluminum chassis and “bank vault,” ball bearing control knobs
  • Solid, precision CNC machined aluminum isolation base with Stillpoints ULTRA MINI feet
  • Designed and manufactured by Vinnie Rossi in the USA
  • 10-year warranty

Vinnie Rossi L2i ‘Signature Edition’ Integrated Amplifier

£18,995.00Price
Additional Options
  • Output Power:
    (Tested with 120Vac input)

    100W RMS per channel into 8-ohms (170W RMS per channel into 4-ohms)

    Output Impedance:

    Approx. 0.1 ohm

    Input Impedance:

    Approx. 10k ohm (RCA and XLR inputs)

    Frequency Response:

    0.5Hz – 150kHz (+/- 1dB)

    Voltage Gain:

    32dB (with stock EH300B tubes)
    24dB (DHT Bypass Mode Enabled)

    THD+N (with stock EH300B tubes):

    Less than 0.5%

    THD+N (DHT Bypass Mode Enabled):

    Less than 0.01%

    AC Input:

    Factory configured for 110-120Vac, or 220-240Vac (50/60Hz)

    Protections:

    Fused inputs for linestage and power output stage sections
    MOV (AC input surge protection) 
    Output short circuit protection

    Dimensions (with tube covers
    and isolation base installed):

    Approx. 17.25” wide x 14.5” deep x 8.88” tall (438m x 368mm x 226mm)

    Weight: 

    Approx. 50lbs. (23kg)

    Shipping Weight:

    Approx. 60 lbs. (27kg)

    Volume Control:

    Balance control: 

    64 steps (approx. 1dB per step) from -∞ to +8dB

    24 steps from L to R (approx. 1db per step)

Looking for more information? 
Contact our expert sales team now!
 
info@eliteaudiouk.com 01334 570 666

©2018

website design by